Roll up doors
Model 650 Rollup door
- Pre-assembled for time and money savings
- Utilizes 9" diameter drum wheel
- Maximum opening size of 12' wide x 14' high (168 sq.ft.)
- Push-up, hand chain and internal electric operations
Model 1000 Rollup door
- Pre-assembled for time and money savings
- Utilizes 9" diameter drum wheel
- Maximum opening size of 12' wide x 14' high (168 sq.ft.)
- Reduced drive chain hoist is right hand only · ~26-gauge galvanized corrugated steel · Grade 80 galvanized steel · 20 standard colors (special colors upon request for a nominal upcharge)
Model 1950 Rollup door
- Pre-assembled for time and money savings
- Utilizes 9" diameter drum wheel
- Maximum opening size of 12' wide x 14' high (168 sq.ft.)
- 26-gauge galvanized corrugated steel
- 20 standard colors (special colors upon request for a nominal upcharge)
Model 2000 Rollup door
- Utilizes 12" drum wheel
- Maximum opening size of 12'wide x 18' high (216 sq.ft.)
- Maximum opening size of 12' wide x 14' high (168 sq.ft.)
Model 2500 Rollup door
- Utilizes 12" drum wheel
- Maximum opening size of 18' wide x 18' high (324 sq.ft.)
- Grade 80 galvanized steel
- Push-up, hand chain and internal electric operations
- 20 standard colors (special colors upon request for a nominal upcharge)
Model 3000 Rollup door
- Designed to meet stringent building codes in coastal regions
- Utilizes 12" drum wheel
- Maximum opening size of 16' wide x 18' high (288 sq.ft.)
- Push-up, hand chain and electric operations
Roll Up Door Accessories
Pantheon Motor Mini
Pantheon is a low voltage DC mini rolling door operator, manufactured exclusively for and distributed by Janus International.
Pantheon Motor
The Pantheon electric door operator from Janus International is a unique new technology designed to make installation as easy as 1-2-3.
Remote
Weather-proof single or 3-button wireless control stations are available. In addition, a choice of either a 5 or 250-code wireless keypad is available
Chain Hoist Kit
A reduced drive chain hoist allows for smoother operation on doors over 10'0" wide or 10'0" tall.
Mounting Plates
Mounting Brackets are engineered and designed with deep embossing for strength, and are independently tested to withstand more than 2,700 pounds per pair.
Step Plate
Used to close door completely using ones foot
Cast Axel Support Bracket
The cast axle support bracket is used on doors that incorporate a chain hoist.
Stamped Axel Support
The stamped axle support is used on doors that are not incorporating a chain hoist and is used to hold the axle in place.
Vision Panel
Can be installed into door to be used as a viewing window
Top Draft Stop
Attached to the top of door to reduce draft
Side Draft Stop
Used on the sides of door to reduce draft
Bulb Astragal
Attached to the bottom of door to reduce draft
Sliding Door Accessories
Door Stop
Stops the sliding door once it is fully open. Keeps the door from being over torqued. Helps to avoid wind damage to door.
Adjustable Door Stop
Stops the sliding door once it is fully open. Keeps the door from being over torqued. Allows for greater adjustment from side of building than the nonadjustable door stop. Helps to avoid wind damage to door.
Stay Roller
Reduces friction at the bottom of the door. Keeps the door from being pulled away from the side wall. Located at a fixed position from the wall.
Adjustable Stay Roller
Reduces friction at the bottom of the door. Keeps the door from being pulled away from the side wall. Can be adjusted to a degree from the wall.
Cover Bracket
Face Mount for Track Cover.
Endplug
Fits into the end of the door track.
Galvanized Handle
Attaches to the sliding door for a grip to open and close the door. Please specify mill finish or white
White Handle
Attaches to the sliding door for a grip to open and close the door. Please specify mill finish or white
Center Latch
Zinc plated steel construction. Includes two styles of latch catches. Adjusts for thickness of door frame. For use in wood or metal frames. Can be used for either right or left handed applications.
Door Track (key-hole)
Round side mount track for sliding doors Built in keyholes for mounting brackets Available in 8’, 10’, 12’ and 14’ (Longer lengths acquired by using splice collar) * Side-mount in stock top-mount for pass-by doors available by special order
Outside Rail
Outside rail for sliding door framing Also used as the male side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order)
Inside Rail
Female side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order)
Bottom Rail
Bottom rail framing for sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order)
Double Couple (pass by doors)
For mounting parallel runs of keyhole track for by-passing doors * Top-mount track for pass-by doors available by special order only
Splice Collar
Outside rail for sliding door framing Also used as the male side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order)
6 1/2″ Trolley (with Offset)
Trolley hanger for wood and metal framed doors Swivel stirrup provides up to a 180 degree swing in either direction
9 1/2″ Trolley (with Offset)
Trolley hanger for wood and metal framed doors Swivel stirrup provides up to a 180 degree swing in either direction Adjusts vertically and laterally Has 5" thread.
Wood Door Trolley
For mounting parallel runs of keyhole track for by-passing doors. Top-mount track for pass-by doors available by special order only.
Jamb-Latch
Outside rail for sliding door framing Also used as the male side of the inside frame for split sliding doors Available in 8’, 10’, 12’, and 14’ (Longer lengths by special order)
Door Girt
Trolley hanger for wood and metal framed doors Swivel stirrup provides up to 180? swing in either direction
Track Bracket
Can be installed into door to be used as a viewing window
Sliding Latch
Latches the door using a sliding bolt. Can also be used in conjunction with a padlock for security.
Doors
Tradesman II
- (3068) Outside dimension 40" x 81-3/8"
- (4068) Outside dimension 52" x 81-3/8"
- White steel jam with smooth steel skin door. Available in Left and Right hand.
Light weight personnel door
- (3068) Outside dimension 37-9/16" x 81-3/4"
- (4068) Outside dimension 49-9/16" x 81-3/4"
- 4068 Aluminum jamb with embossed aluminum skin. Available in Left and Right hand.
Heavy duty commercial door
- (3070) Outside dimension 39-13/16" x 84-5/8"
- Smooth steel skin with rolled edge panel. Used primarily in steel buildings. Available in Left and Right hand.
Door accessories
Door Knob
- Standard door knob
Door Lever
- Heavy duty lever style lock